|
Click Here to Order Synthetic Powershift Transmission Fluid SAE 10W
from the AMSOIL Online Store
AMSOIL Synthetic Powershift Transmission
Fluids are Recommended for Applications Requiring the Following Specifications:
-
Caterpillar TO-4
-
Allison C-4
-
HD Torque and Drivetrain
AMSOIL Synthetic Powershift Transmission
Fluids are specifically designed for heavy-duty powershift transmissions.
Formulated for extended drain intervals, AMSOIL Synthetic Powershift
Transmission Fluids contain top-quality synthetic basestocks and a high
level of top-quality additives selected specifically for powershift
transmission performance. They offer unmatched transmission friction
performance, smooth brake operation, reduced gear and bearing wear and
increased equipment life. AMSOIL Synthetic Powershift Transmission Fluids
extend time between overhauls.
Friction Characteristics
AMSOIL Synthetic Powershift Transmission
Fluids are compatible with common metallic and nonmetallic friction
materials. AMSOIL Synthetic Powershift Transmission Fluids' stable frictional
characteristics eliminate the problems of excessive brake noise and
vibration, clutch slippage, friction surface deposits and design material
degradation.
AMSOIL Synthetic Powershift Transmission
Fluids are formulated for fast, smooth clutch engagements and wet brake
operations; excellent power transmission through clutches and synchronizers;
and superior hydraulic fluid performance for servo equipped units.
Wear Protection
AMSOIL Synthetic Powershift Transmission
Fluids exceed the wear requirements of the Caterpillar TO-4 specification.
AMSOIL Synthetic Powershift Transmission Fluids are formulated without
viscosity index improvers for superior shear stability. They maintain
grade throughout service life, due to their superior shear stability,
providing long-term protection against equipment wear, even when equipment
is frequently subjected to sustained periods of applied pressure or
high horsepower and high torque.
High and Low Temperature
Performance
In high temperatures, AMSOIL Synthetic
Powershift Transmission Fluids dependably protect components from wear.
Their superior oxidative and thermal stability inhibits the formation
of varnish, deposits and sludge so equipment runs clean. AMSOIL Synthetic
Powershift Transmission Fluids are excellent heat transfer fluids and
may help hot-running equipment operate up to 50° F cooler and keep them
running in their optimal temperature range. In low temperatures, AMSOIL
Synthetic Powershift Transmission Fluids flow readily for dependable
startup and post-startup protection.
Copper Corrosion, Rust
and Foam Inhibition
AMSOIL Synthetic Powershift Transmission
Fluids protect equipment from copper corrosion and rust, even during
equipment storage. AMSOIL Synthetic Powershift Trans- mission Fluids
do not foam in service, protecting equipment from the metal-to-metal
contact and wear that occurs with use of foam-filled fluids.
Installation
AMSOIL Synthetic Powershift Transmission
Fluids are fully compatible with other fluids used in powershift applications.
To install AMSOIL Synthetic Powershift Transmission Fluids, drain the
fluid in the system,, replace the filter (if so equipped) and install
the appropriate AMSOIL Synthetic Powershift Transmission Fluid.
Service Life
AMSOIL Synthetic Powershift Transmission
Fluids provide two to five times the service life of conventional petroleum
fluids if AMSOIL Synthetic Powershift Transmission Fluids are kept free
of dirt and moisture.
AMSOIL Synthetic Powershift Transmission
Fluids may be used for 250,000 miles or five years (whichever comes
first) in manual transmissions.
AMSOIL Limited
Warranty
|
Typical Technical
Properties
AMSOIL SAE 10W Synthetic Powershift Transmission Fluid (CTG)
|
|
SAE Viscosity Grade
|
10W
|
|
ISO Viscosity Grade
|
32
|
|
Kinematic Viscosity @ 100° C, cSt
(ASTM D-445)
|
7.1
|
|
Kinematic Viscosity @ 40° C, cSt (ASTM
D-445)
|
40.5
|
|
Viscosity Index (ASTM D-2270)
|
138
|
|
Flash Point °C (°F) (ASTM D-92)
|
254 (486)
|
|
Fire Point °C (°F) (ASTM D-92)
|
270 (518)
|
|
Pour Point °C (°F) (ASTM D-97)
|
-51 (-60)
|
|
Four Ball Wear Test 40 kg. 75°C, 1200
rpm, 1 hour (ASTM D-4172 B)
|
0.35
|
|
Noack 250°C, 1 hour, percent weight
loss (DIN 51581)
|
5.3
|
|
