|
Product Code - ATP
|
Saber™ Professional Synthetic
2-Cycle Oil
Designed for premix applications as lean as 100:1 ratios. Richer mix ratios
may be used when desired. Saber™ oil improves throttle response, lowers
or eliminates smoke, controls deposit formation, and lowers emissions. Saber™
Professional has a performance emphasis on hand-held power equipment such
as chain saws and lawn/utility equipment. ISO-L-EGD, JASO FC, API TC
Package sizes include:
1.5-oz Pillow Pack
1.5-oz. Pillow Packs (case of 48)
3.5-oz. Bottle
3.5-oz. Bottles (case of 12)
8-oz. Bottle
8-oz. Bottles (case of 12)
1-Quart Bottle
1-Quart Bottles (case of 12)
30-Gallon Drum
55-Gallon Drum
|
Click Here to Order Saber Professional Synthetic 2-Cycle Oil from
the AMSOIL Online Store
AMSOIL Saber Professional (ATP)
Synthetic 2-Cycle Oil is specifically designed for lean mix
ratios in pre-mix applications. Saber Professional contains
high temperature detergents for small power equipment. Extensive
testing shows superior lubricity and cleanliness properties
at lean mix ratios of this premium synthetic formulation.
- Saber Professional
is virtually "Smokeless"
- At 100:1, this
oil produces lower emissions than oils mixed at 50:1
- Saber Professional
is recommended for ISO-L-EGD applications
- One mix ratio
for everything eliminates confusion
- Versatile and
very good for many applications
- Cost effective
compared to oils mixed at 50:1 or richer
- Lean mix ratio
helps prevent plug fouling and exhaust port deposits
Product Description
AMSOIL Saber Professional (ATP)
Synthetic 100:1 Pre-Mix 2-Cycle Oil is formulated with exclusive
AMSOIL synthetic base oils and premium additives. Designed for
lean mix ratios in two-cycle motors, Saber Professional 2-Cycle
Oil has excellent lubricity and cleanliness properties that
control friction, wear, plug fouling, ring sticking and exhaust
port blocking. AMSOIL Synthetic 100:1 2-Cycle Oils have been
protecting and providing improved performance in two-cycle motors
since 1973.
Saber Professional
Saber Professional (ATP) is
specifically designed for small engines including, but not limited
to, chain saws, lawn equipment, blowers, chop saws, pumps, scooters
and go-carts. It is also very good for use in motorcycles, snowmobiles,
ATVs, jet boats and personal watercraft. Saber Professional
is formulated with high temperature detergent additives that
limit hard carbon deposit formations in hot operating motors.
Saber Professional is “smokeless” and delivers lower emissions
at 100:1 mix ratios than oils mixed at 50:1. Equipment operators
subjected to smoke and fumes will benefit from these low emission
properties. Because one mix ratio satisfies multiple pieces
of equipment, Saber Professional eliminates mix ratio confusion.
Saber Professional is recommended for pre-mix where ISO-L-EGD,
JASO FC or API TC is specified.
Applications
AMSOIL Saber 100:1 2-Cycle
Oil is recommended for 100:1 mix ratios in normal service. Richer
mix ratios may be used where desired.
|
Typical Technical Properties
Saber Professional Synthetic 100:1 Pre-Mix 2-Cycle Oil (ATP)
|
|
Kinematic
Viscosity @ 100°C, cSt (ASTM D-445)
|
13.5 |
|
Kinematic
Viscosity @ 40°C, cSt (ASTM D-445)
|
99 |
| Viscosity Index (ASTM
D-2270) |
136 |
|
Pour Point
°C (°F) (ASTM D 97)
|
-38 (-36) |
|
Flash Point
°C (°F) (ASTM D 92)
|
114 (237) |
| Fire Point °C (°F) (ASTM
D 92) |
114 (237) |
|
DANGER:
harmful or fatal if swallowed. Contains synthetic lubricant
and petroleum distillates. If swallowed do not induce vomiting.
Contact a physician immediately. Keep away from fire, heat
and open flame. Use with adequate ventilation. Avoid frequent
or prolonged skin contact. Flush eyes with water for 15
minutes in case of contact. KEEP
OUT OF REACH OF CHILDREN. |
|
